AVS Ventvisor Deflector Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Driver Side
Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean the surfaces where visor will mount
with an alcohol pad.
clean painted surface
clean trim
1
Note: Visors mount on the outside painted
surface of the door frame.
Installation Instructions
Ventvisor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
clean vertical
post
Deflector
®
Passenger Side
Visor
Clean Towel
Remove tape liner from front and rear flanges. Peel
back 2" (5 cm) of tape liner from each end of top
free end
rear flange
2
Page 1 of 2
I - Sheet Number VV20 Rev.A
Alcohol Pad x2
flange.
top flange
free end
front flange