Nuna ZAAZ Manual De Instrucciones página 12

Assemble Footrest onto Seat
1 Slide down the lock behind the flap and lift the flap completely. The seat
automatically rises up to its highest position.
2 Attach the footrest on one side of the flap and then flex the footrest to
attach it on the other side.
3 Lower the flap down into position. Listen for the click as the lock clicks
back into position.
Assemble Seat Cushion onto Seat
1 First remove the harness restraint if necessary, then place the seat cush-
ion onto the seat. Refer to "Remove the Harness Restraint"
2 Insert the seat cushion clip into the inner of two holes in the sitting sur-
face and listen for a click.
Assemble Harness Restraint onto Seat
WARNING
must always wear the harness restraint correctly fitted
and adjusted.
1 Insert waist clips into the lower backrest holes (around the seat cushion,
when cushion is in use) and listen for a click.
2 Insert shoulder harness clips into the upper backrest holes and listen for
( 5 )
a click.
3 Insert the remaining center buckle clip (through the seat cushion, when
cushion is in use) into the inner of two holes in the sitting surface of the
seat and listen for a click.
4 Check that the harness attachment is secure by pulling on each attach-
ment point.
12
All manuals and user guides at all-guides.com
( 4 )
When used as a high chair, the child
( 5 )
( 2 )
( 5 )