Product Specifications; Package Contents - Inateck SA01001 Manual Del Usuario

Product specifications

Product name
Product type
material
Weight
Color
Supported drives interface
Maximum height of drives
Hot plug，plug&play
Licenses
Measurements

Package Contents

Inateck SA01001 x1
Instruction manual x1
Sponge pad x1
Note
a. Before the removal of the data storage device , please stop all data
access and transfer to the device.Forced removal may lead to damage
or loss of crucial data.
b. To ensure normal functions of the hard drive enclosure, please make
sure the rated power of your hard drive is about the same with the
output power of a regular USB port.
c. Automatic sleep and spin-down, goes into sleep mode automatically
after 30 minutes in idle state. The LED indicator will flash once in three
seconds by the time.
D. Due to the thickness difference of 2.5'' hard disk, a sponge pad was
attached. Users are suggested to paste the sponge to the internal side
of the shell to avoid hard drive sliding when installing a thin hard drive.
Ultra slim 2.5 Inch HDD Enclosure
Inateck SA01001
Aluminum
88g
Silver gray
SATAIII/II/I
Height of up to 9.5mm HDD/SSD supported
supported
CE，FCC
132.6x81.5x15.6mm