LuxaFlex Skylight Serie Manual Del Usuario página 5

Nederlands
3. Tilt-only Venetian blinds
If your Venetian blind is equipped with the tilt-only option, then you can adjust the angle of the slats
by using the remote control supplied.
Please see also the specific tilt-only mounting instructions.
UNINSTALLING
To uninstall the product completely, carry out the fitting instructions in reverse order, as described
above.
In short:
• Fully slide the bottom slat up.
• If you still have them, fix the transportation clips between the cassette and the bottom slat.
• Release the tension cords from the side channel sections, and wind the cords around the transpar-
ent clips (see picture 8).
• De-mount the side channel sections.
• Synthetic mounting brackets: de-mount the cassette by pushing a flathead screwdriver between
the window and the upper part of the top case.
• Metallic mounting brackets: de-mount the cassette by using a flat blade screwdriver
to push back the lip of the clip (see picture 9).
• Unscrew the brackets.
CLEANING
Roller Blinds, Duette® and Plissé Shades
To avoid dust build-up dust regularly with a feather duster.
All fabrics, except for metallic fabrics, can also be wiped with a slightly damp clean cloth.
Ingrained dirt can be removed with non-synthetic detergent solution.
Prevent damage to the fabric by wiping gently.
Venetian Blinds
Luxaflex® Skylight Venetian Blinds are easy to clean by removing dust regularly with a feather duster.
If necessary, a damp cloth can be used.
Ingrained dirt can be removed by using a mild all-purpose detergent solution.
The above recommendations have been drawn up with care. We are, nevertheless, unable to accept
responsibility for the results of cleaning.
Should you have any more questions, please contact your Luxaflex® dealer.
WARNING
• Young children can be strangled by loops in
pull cords, chains, tapes and inner cords that
operate the product. They can also wrap cords
around their necks.
• To avoid strangulation and entanglement,
keep cords out of reach of young children.
• Move beds, cots and furniture away from window covering cords.
• Do not tie cords together. Make sure cords do not twist and create
a loop.
• Install and use the included safety devices according to the
installation instructions on these devices to reduce possibility of
such an accident.
According to EN 13120:2009+A1:2014.
5