Oglo MS-O-400-D Manual Del Usuario página 39

At the end of the search, the first station found in alphanumeric order is broadcast.
•
To select another station, briefly press the
•
press or wait for 3 seconds to confirm. The selected station is broadcast.
If no station is received,
•
very weak reception.
Browsing the menus
Press the MENU button to access the DAB menu.
Select the menu of your choice by pressing the
button to confirm. The following menus are available:
full search : searches for all available DAB radio stations.
•
manual setting : allows you to manually set a specific channel/frequency and add it to the list of
•
stations already stored.
DRC : Some stations in the DAB network support a volume control which is active during playback.
•
If the volume suddenly increases, the DRC automatically decreases it. If the volume suddenly
decreases, the DRC automatically increases it. The same procedure is applied when the volume
suddenly decreases: the micro hi-fi system will increase the volume again.
:
clean If your list includes stations that you no longer receive (you may be in another area), you can
•
select the clean option to remove them and clean up the list of stations.
system : provides access to the configuration menus of your micro hi-fi system.
•
Performing an automatic search
You can update the list of stations received by doing another automatic search for DAB stations. New
stations and services will be added to the DAB broadcast. To get the new stations and new DAB
services available, regularly perform an automatic search.
Press the MENU button to access the configuration menus.
1.
Select the full search
2.
search starts.
You can also press and hold the SCAN button on the remote control or the
3.
Performing a manual search
The manual search allows you to perform a specific search over a frequency. This is useful if you want
to get the best reception possible for a particular station or if you want to get the channel list of a
certain frequency without having to perform a full search.
Press the MENU button to access the configuration menus.
1.
Select the manual search
2.
automatic search starts.
NO DAB appears on the display. This means that there is no reception, or only
menu with the
menu with the
or button on the remote control. Then
or button, and then press the
or button, and then press
or button, and then press
. The automatic
button for 3 seconds.
. The
39