KTM Power Parts 60612922050 Manual De Instrucciones página 5

1
Scope of supply

2x lock body with key

2x toothed washer

2x nut

2x sleeve
Mounting for both cases

- Remove screws .

- Remove screws with the seal rings.
- Take off lock support.

- Remove nuts with toothed washers
NOTE:
Fix the remaining lock support items, so they do not fall out.
- Key position: 90° upwards.
- Remove original lock body
- Replace original sleeves with new sleeves

- Mount lock body (supplied) with key.

.

with key.

(supplied).
5