Philips AZ 3010 Guia De Inicio Rapido página 11

TROUBLESHOOTING
Troubleshooting
he If a fault occurs, first check the points listed below before taking the set for repair.
Do not open the set as there is a risk of electric shock.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING:
a
n
– Problem
• Solution
No sound /power
– Volume not adjusted
• Adjust the VOLUME
a,
– Mains lead not securely connected
• Connect the AC mains lead properly
– Batteries exhausted/ incorrectly inserted
• Insert (fresh) batteries correctly
ed!
Display does not function does not function
properly/ No reaction to operation of any of
the controls
n
t
– Electrostatic discharge
• Switch off and unplug the set. Reconnect after a
few seconds
Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3 materials: cardboard,
paper pulp and expandable polyethylene.
All manuals and user guides at all-guides.com
Under no circumstances should you try to repair the set yourself, as this will invalidate the
guarantee.
no disc indication
– CD-RW inserted /No CD inserted
• Insert a CD or a CD-R
– CD badly scratched or dirty
• Replace/ clean CD, see Maintenance
– Laser lens steamed up
• Wait until lens has cleared
– CD-R is blank or the disc is not finalized
• Use a finalized CD-R
CD playback does not work
– CD badly scratched/ dirty
• Replace/ clean CD (see maintenance)
– Laser lens steamed up
• Wait until lens has adjusted to room temperature
The CD skips tracks
– CD damaged or dirty
• Replace or clean CD
– SHUFFLE or a program is active
• Quit SHUFFLE/ program mode(s)