Marley ONE FOUNDATION Manual Del Usuario página 4

CONNECTING YOUR DEVICE VIA BLUETOOTH ®
PAIRING MODE (BLINKING BLUE LED)
Change to the Bluetooth audio source to connect your
when turned on, One Foundation automatically goes into
when in Pairing Mode.
NOTE: Holding the on the One Foundation remote
connected and put One Foundation into Pairing Mode.
Pairing mode can also be engaged by pressing the Pair
on the back of One Foundation.
CONNECTED MODE (SOLID BLUE LED)
Foundation. One Foundation does not require a pairing
IB-EM-DA002_.indd 6-7
CONNECTING OTHER DEVICES
The various inputs on the back and right side of One
Foundation allow you to connect other devices to the system.
the back or the auxiliary input on the side.
digital audio (optical) input for the highest sound quality.
USB CHARGING PORT
® , smartphone, or
tablet. The port is always active when One Foundation is
plugged into a wall outlet.
PRE-OUT BLUETOOTH / ALLPLAY
RCA ANALOG DIGITAL (OPTICAL)
RCA ANALOG For use with analog sources
DIGITAL (OPTICAL) Recommended for use with digital peripherals. Peripheral must be connected and turned on in order to cycle to this input.
BLUETOOTH PAIR This mode can also be initiated by pressing and holding the [INPUT] button on the remote.
ALL PLAY For use with Qualcomm® AllPlay ™ mode to connect via Wi-Fi. Network Error/Not Found (flashing GREEN led).
NETWORK STANDBY
AUX
This input will be triggered automatically when a 3.5mm auxiliary cable (included) is plugged into One Foundation.
PRE-OUT Recommended for use with active subwoofer (not included).
USB POWER Port for charging devices (including most tablets).
( )
AUX
USB POWER
11/11/15 5:48 PM