Care And Cleaning - AVS Ventvisor Deflector Instrucciones De Instalación

Installation Steps
Place front end flange behind plastic mirror cap and align
visor on the black rubber window channel. With visor in
its final position, remove remaining tape liner by pulling
on free ends.
12
4 Piece Set
The rear visor uses the same attachment method as the
front visor. Open pop out window prior to installation.
Attach visor to the vehicle's painted metal surface. DO
NOT buff surface.
14
Repeat Steps 8 - 14 for opposite side.

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,
Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of
installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from drawings.
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Apply pressure to the tape flanges to secure.
Retighten previously loosened screws and replace
13
logo are trademarks of Lund International, Inc.
TM
Page 4 of 4
mirror cap.