AVS Ventvisor Deflector Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean the painted surface above the trim where
the visor will mount with an alcohol pad.
Note: Due to the absence of a door frame,
1
the visors attach to the painted surface of the
Installation Instructions
Ventvisor
Front Passenger
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
vehicle.
Deflector
®
Side Visor
Clean Towel
Peel back 2" (5cm) of tape liner from each end of
free end
2
Page 1 of 2
I - Sheet Number VV118 Rev.A
Alcohol Pad x2
top flange.
free end
top flange
flange
front flange
rear