Installation Steps; Care And Cleaning - AVS Ventvisor Deflector Instrucciones De Instalación

Installation Steps

Align the driver side visor with the previously cleaned
3
Press the exposed area of tape against the surface and
verify position. Open the door to ensure the visor does
not obstruct door opening.
5
Press along visor flanges to ensure proper adhesion.
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
surfaces.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2010 Lund International, Inc. All rights reserved.
, the Auto Ventshade
TM TM
Ensure the visor is properly aligned along the previ-
clean painted
surface
4
With the visor in its final position, remove the remaining
tape liner by pulling on free ends.
6
Repeat Steps 1 - 7 for drivers side visor
logo and the AVS logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
ously cleaned surface.
passenger
side visor