Operating The Device; Switching Off - Gigaset L410 Manual De Instrucciones

Operating the device

Switching on
¤
Press the Answer/End call key for at least 3 seconds until
you hear the start-up melody.
Note: When you place a device that is switched off into the
charging cradle, it switches on automatically after a maximum of
1 minute.

Switching off

¤
Press the Answer/End call key for at least 3 seconds until
you hear the shut-down melody.
Searching for the device
¤
Select the Gigaset L410 from the list of registered handsets and call it internally
¤
or
Use your base's paging function.
Deregistering the device from the base
¤
Using your telephone's handset
Carry out the standard deregistration procedure for handsets, as described in
the operating instructions for the handset.
Deregistering the device from the base and restoring factory
settings
¤
¤
Switch off the device (
Press the Answer/End call key and one of the volume keys (
simultaneously for at least 3 seconds.
In this case, the device remains in the list of handsets registered to the base
until it is also deregistered there.
Note
Following deregistration, the device automatically switches to registration
mode.
£
page 27).
27
> 3
seconds
or )