Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock; Setting The Date And Time; Operating The Phone - Gigaset C34 Manual De Instrucciones

Operating the phone

Please note:
u
Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and insert
them in again.
u
The batteries may warm up as they are
charging. This is not dangerous.
u
After a while the charge capacity of the
batteries will decrease for technical rea-
sons.
Activating/deactivating the
handset
a
Press the end call key and hold
(confirmation beep).
Activating/deactivating the
keypad lock
#
Press the hash key and hold.
You hear the confirmation beep. The icon
Ø appears in the display when the keypad
lock is activated.
The keypad lock deactivates automatically
when you receive a call and activates
again after the call.
Note:
The handset displays an advisory message if
you press a key by accident while the keypad
lock is on. To deactivate the keypad lock, press
#
the hash key and hold.

Setting the date and time

¢ ¢
Settings
§§Menu§
~
Enter the day, month and year
with 6 digits and press
q to move between the
fields.
~
Enter hours and minutes with
4 digits (e.g. Q M 1 5 for
07:15) and press
to move between the fields.
6
Date/Time
. Use
§OK§
. Use q
§OK§
Operating the phone

Control key

§§§§INT§§§ §§Menu
1 Display functions
2 Control key
In these instructions, the side of the con-
trol key that you must press in the given
operating situation is shown in black (top,
bottom, right, left). Example: t for "press
the top of the control key".
The control key has a number of different
functions:
When the handset is in the idle state
s
Open the directory.
t
Adjust the ringer melody vol-
ume of the handset (page 13).
In lists
t / s
Scroll up/down line by line.
In menus
t / s
Scroll up/down line by line.
In an input field
t / s
Move the cursor left or right.
During an external call
s
Open the directory.
t
Adjust loudspeaker volume for
earpiece and handsfree mode.
Using display functions
The current display functions are shown
reverse highlighted in the bottom display
line.
u / v
Launch left / right display func-
tion.
1
2