pico Technology A3000 Serie Guia De Inicio Rapido página 11

Quick Start Guide A3000 Series Active Probe
Further information
Warranty
This probe is supplied with a two-year return-to-manufacturer warranty against
Y E A R W A R R A N T Y
defects in material and workmanship. Visit www.picotech.com/about for more
information.
Legal information
Information regarding Pico's software licenses, liability, privacy policy, trademarks and other legal
matters is available (in English) at www.picotech.com/about/legal-information.
FCC Declaration of Conformity
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference which the user
will be required to correct at their own expense.
UKCA Declaration of Conformity
This probe has been designed and tested in accordance with the following UKCA Statutory
Requirements: SI 2016/1101 Electrical Equipment (Safety) Regulations, SI 2016/1091 EMC
Regulations, SI 2012/3032 Restriction of Hazardous Substances Regulations and SI 2013/3113 Waste
Electrical and Electronic Equipment Regulations and left the factory in a safe condition.
For more information, please refer to your product's UK Declaration of Conformity, available for
download from www.picotech.com/library/documentation.
EU Declaration of Conformity
This probe has been designed and tested in accordance with the following European Union directives:
2014/30/EU (EMC), 2014/35/EU (LVD), 2012/19/EU (WEEE) and 2011/65/EC (RoHS), and left the
factory in a safe condition.
The EU Declaration of Conformity is available for download from
www.picotech.com/library/documentation.
Applicability
Information in this publication supersedes that in all previously published material.
Trade marks
Pico Technology, PicoScope and PicoSDK are registered trade marks of Pico Technology Ltd.
Technical support
Regularly updated technical support information can be found on the Pico Technology
technical support web page (www.picotech.com/tech-support) and the Test & Measurement
Forum (www.picotech.com/support). You can also email support@picotech.com or telephone
+44 (0) 1480 479 164 to contact our team directly.
Consult www.picotech.com for information on using PicoSDK, which allows you to control the probe
and oscilloscope from your own software application.
Made in the United Kingdom.
DO350-1 Copyright © 2021 Pico Technology Ltd. All rights reserved. 7