Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
• To prevent losing and damaging of the information in the SIM card, please DO NOT touch the metal plane
area and the SIM card should be kept far away from EMF. Once the SIM card is damaged, you can not enter
into the GSM network.
NOTE: Please do power off your mobile phone before pulling out the SIM card. It is forbidden to insert or
pull out the SIM card with the mobile phone connected to the external power supply, otherwise, the SIM card
is most likely to be damaged.
2.1.1 Insert and pull out the SIM card
• Power off your mobile phone and then remove the battery and other external power supply.
• Insert the SIM card into the SIM card slot, make sure the SIM is fixed accurately.
• When you need to pull out your SIM card, please power off your mobile phone first, then remove the battery,
open the SIM card slot and then pull out your SIM card.
NOTICE: The card slot on the left is SIM1 card, the one on the right is SIM2 card.
2.2 Battery
• The battery can run immediately after being installed since it's charged at about 50% volume. In order to
reach the optimum operation, please use after fully charging battery completely. The new battery should
be charged for at least 14 hours. Only when the initial battery is thoroughly exhausted, (when the electricity
quantity runs out and the mobile phone won't power on) can the battery be fully recharged for use, and so
will the second time of charging. Only when cycled (for three times) in this manner can the battery work in
optimal condition easily.
2.2.1 Disassembly and installation for battery
Please take out the battery under the following directions: 1) Unbolt the back cover. 2) Remove when lifting
from the back. Install under the following directions: 1) Insert from the top of the battery downwards. 2) Shut
the back cover of the mobile phone.
151023_Acc20_EnglishSpanish_UserManual_v5.indd 11
All manuals and user guides at all-guides.com
11
10/26/15 3:44 PM
Publicidad
Capítulos
Tabla de contenido
