All manuals and user guides at all-guides.com
NOTICE: If the screen displays "Emergency", it means you are out of the scope of service, but you can dial
Emergency Number.
2.4 The use of USB data route
The method of using USB data route: Input one of the ports into the computer, then input the other port to the
phone, after that you can transfer the data between the computer and the phone. The phone supports the USB,
you can copy and move the file between the phone and the computer after you link the USB to the computer.
You can view the information in the memory card.
NOTE:
1. After the phone is connected, you will find the USB information on the computer, and then you can read
the file in My Computer. If there is no information, then you must check the USB port of your mobile phone
and insert it again.
2. If you connect the phone to the computer when the phone is powering on, there are three items displaying
on the phone, you should select the "Mass storage", and then you can copy or move the file between the
phone and the computer.
3. After that, you need to double click the USB icon in the right corner of the computer, and then select
"stop", now you can withdraw the USB from the computer and the phone. DO not withdraw the USB from the
computer directly, otherwise the data in the memory card will be lost, and it can also damage the phone.
4. You must do it on the computer, which is in Windows2000 or WindowsXP.
2.5 Install and pull out T-flash card
This mobile phone supports T-flash card, which is a kind of multimedia memory card used to increase memory
of the mobile phone. It is so small that you should take precautions in installing or pulling it out in order to
avoid damage. The method to install/pull out the T-flash card is as follows:
1. Install the T-flash card: Power off the mobile phone, unlock T-flash card slot cover, and set T-flash card with
the metal face downward to the T-flash card slot. Then lock T-flash card protection cover.
13
151023_Acc20_EnglishSpanish_UserManual_v5.indd 13
10/26/15 3:44 PM