Charge The Battery; Power On - Accellorize 00079 Manual Del Usuario

All manuals and user guides at all-guides.com

2.2.2 Charge the battery

Connect the charger to power supply. Insert the connector of the charger to the hole or the USB port at
bottom. The indicator at the right-top will bicker circularly; the charging symbol will appear to indicate it is
charging just in its power off state. The charging symbol will appear if the phone hasn't been charged for a
while and when it is lacking a charge. When the indicating symbol at the right-top corner is in its 'full' state and
no longer twinkling, charging has been completed. The picture will display in the screen when charging has
been completed if charging in its power off state. This process takes approximately 3-4 hours. It's normal if the
battery, mobile phone and charger get hot during charging. Cut off the power supply and make mobile phone
and charger disconnected when charging completed.
NOTES: Please charge with the charger supplied by manufacturer at the temperature range from -10ºC- +
50ºC in a ventilated place. The use of non-ratified charger may cause both danger and noncompliance of
certified and repair guaranteed terms.
Please charge promptly when mobile phone automatically powers off or shows the warning"charge warning".
The standby and talk time provided by manufacturer is based on an ideal situation. Practical working time will
change with network status, operation environment and operation manner. Proper battery installation should
be ensured before charging, otherwise it cannot charge. The charger must be disconnected from mobile
phone and power supply after charging completely. If charger hasn't been disconnected from phone and
power supply to some extent after about 5 to 8 hours, it will restart charge. We strongly advice not doing this
for optimal performance and for the life span of your battery.

2.3 Power on

Press the power On/Off key ( ) for a while to switch on/off the mobile phone, which will give you a cue
to insert SIM card if it hasn't been done. Then the mobile phone will automatically examine SIM card after
inserting SIM card. Then cues will appear on the screen detailed as follows:
- Input mobile phone password if phone unlock password has been set.
- Input PIN if SIM card password has been set.
Then the phone will search network until finding available network.
12
151023_Acc20_EnglishSpanish_UserManual_v5.indd 12 10/26/15 3:44 PM