Reinigung Und Wartung; Electrical Safety; Safety In The Workplace - STAMOS S-LS-27 Manual De Instrucciones

3.3.3. TEMPERATURKORREKTUR
1) Das Gerät mit dem Hauptschalter ON/
OFF einschalten, und danach die ON/OFF-
Temperaturtaste drücken, das Symbol ºC wird
blinken. Die ON/OFF-Taste der Temperatur erneut
drücken, und auf dem Display blinkt „00". Das Gerät
schaltet in den Temperaturkorrekturmodus.
2) Indem die Reduktions-/Steigerungstaste gedrückt
wird, wird der Unterschied zwischen der angezeigten
und der gemessenen Oberflächentemperatur der
Heizplatte kompensiert. Temperaturkorrekturbereich:
-50ºC ~ +50ºC.
3) Nachdem Sie die Temperatur korrigiert haben,
drücken Sie die ON/OFF-Temperaturtaste, um die
Einstellungen zu speichern.

3.4. REINIGUNG UND WARTUNG

a) Vor jeder Reinigung und Einstellung, dem Austausch
von Zubehör oder wenn das Gerät nicht benutzt
wird, muss der Netzstecker gezogen werden und das
Gerät vollständig abkühlen.
b) Verwenden Sie zur Reinigung der Oberfläche
ausschließlich Mittel ohne ätzende Inhaltsstoffe.
c) Lassen Sie nach jeder Reinigung alle Teile gut
trocknen, bevor das Gerät erneut verwendet wird.
d) Bewahren Sie das Gerät an einem trockenen, kühlen,
vor Feuchtigkeit und direkter Sonneneinstrahlung
geschütztem Ort auf.
e) Es ist verboten, das Gerät mit einem Wasserstrahl zu
besprühen oder in Wasser zu tauchen.
f) Es darf kein Wasser über die Belüftungsöffnungen
am Gehäuse ins Innere des Geräts gelangen.
g) In Hinblick auf technische Effizienz und zur
Vorbeugung vor Schäden sollte das Gerät
regelmäßig überprüft werden.
h) Benutzen Sie einen weichen Lappen zur Reinigung.
DE
17.05.2019
6
U S E R M A N U A L
TECHNICAL DATA
Parameter description Parameter value
Product name LCD Separator
Model S-LS-27
Rated voltage [V~]/ 230/50
Frequency [Hz]
Temperature range [°C] 50~120 (±2)
Vacuum pump power [W] 12
Suction function pressure 0.05
[Mpa]
Starting power [W] 1,180
Power under load [W] 600
Heating plate resistance <2Ω
Operating temperature 0~40/32~104
[°C/°F]
Storage temperature/ -20~80, -4~176/35~45
Relative storage humidity
[°C,°F/%RH]
Silicone pad dimensions 210x160
[mm]
Heating plate dimensions 280x220
[mm]
USB output port 5V/2A
Device dimensions [mm] 360x290x135
Weight [kg] 6.6
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
17.05.2019
EN
ATTENTION! Hot surface, risk of burns!
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to < Separator LCD>. Do not use
in very humid environments or in the direct vicinity of water
tanks. Prevent the device from getting wet. Risk of electric
shock! Do not cover the ventilation openings!

2.1. ELECTRICAL SAFETY

a) The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never
use it to carry the device or to pull the plug out of
a socket. Keep the cable away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
e) If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
f) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
g) To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
h) Connect the device to a grounded electrical outlet.

2.2 SAFETY IN THE WORKPLACE

a) Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust.
c) If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d) If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
7