TMC Aquarium AQUARAY Control Instrucciones De Funcionamiento página 10

I have two quaBeam 1000/GroBeam 1000
units. Can I control one channel on each
light unit using one quaRay Control unit?
Yes. Choose which of the channels from each
light unit you wish to control, and plug the cable
for each channel into the ports marked Channel
1 and Channel 2 on your quaRay Control unit.
Connect the cable for the other channel on each
light unit directly to a power supply unit.
UsefulTip: connect the cables for the two channels
that are not connected to your quaRay Control
unit to one power supply, and connect the cables
for the two channels that are connected to the
controller to another power supply. By using a
standard On/Off timer switch, you can now set
the two channels that are not connected to the
controller to switch on and off automatically to
synchronise with the Ramp Up and Ramp Down
settings of the two channels on your quaRay
Control unit.
8