Worx MAKER X WX741 Manual Original página 16

Disc sanding
The declared vibration total value may be used for comparing one tool with another, and
may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING! To be accurate, an estimation of exposure level in the actual
conditions of use should also take account of all parts of the operating cycle such as the
EN
times when the tool is switched off and when it is running idle but not actually doing the
16
job. This may significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
Category
20V Hub/HubX
We recommend that you purchase your accessories from the same store that sold you
the tool. Refer to the accessory packaging for further details. Store personnel can assist
you and offer advice.
MakerX series tools and 20V Hub/HubX are specially designed to work together, so do
not attempt to use any other devices.
Vibration emission value a
Uncertainty K = 1.5 m/s²
Model
WA7160
WA7161
= 3.116 m/s
2
h,DS
Capacity
Input: 20 V 10 A Max.
Output: 20 V
Input: 20 V 10 A Max.
Output: 20 V
Or Output: 5 V 2 A (USB port)
10 A Max.
10 A Max.