Publicidad
Idiomas disponibles
Idiomas disponibles
EN
WARNING!
Venicci Turisso chassis is fully compatible with Venicci
Turisso Carrycot and Venicci Turisso Seat Unit.
WARNING!
Always use the restraint system.
Two-point locking system for the carrycot, seat unit and car seat. The locking
the mechanism is triggered automatically when placed in the slots of the carrycot,
seat unit, or car seat adapters. Button to deactivate the locking system. To unplug the
carrycot, seat unit or the car seat, before lifting it up, press the button on the left and
right sides of the chassis. Before you reuse the product, ensure that the locking system
is working correctly by lifting the detachable part.
1. Before use, read the following manual carefully and keep it. The safety of the child
may be compromised if the recommendations included in this manual are not
followed. The manufacturer of the pram is not responsible for effects from not
following notes, warnings and recommendations included in the product docu-
mentation.
2. After purchase maintain all the components specified by the manufacturer in the
manual Service Department (SERVICE) before using the pram. This vehicle requires
regular maintenance by the user. It is the user's responsibility to undertake routine
inspection and maintenance of the vehicle in order to avoid damage to the vehicle
and/or injury to the child.
3. Pram handle tube height adjustment. To change the height of the pram handle
tube press and hold buttons on both sides of the handle tube, select the required
height and release both buttons. After adjusting the height of the handle tube,
hold it in the upper part and move it twice up and down to make sure the locks
function correctly.
4. In the case of prams equipped with transferable handle tubes, ensure that the
child's hands are not outside the internal outline of the seat when changing the
handle tube position. After each change of the handle tube position, check the
effectiveness of the self-fastening locking mechanism by pulling the handle tube
up and down several times.
5. When changing the position of the backrest or the bassinet, pay attention to the
child's hands and head.
6. Footrest adjustment. The pram is equipped with adjustable footrest. To lower the
footrest press the adjustment buttons on both sides of the footrest, adjust the fo-
otrest position and release the buttons. The footrest is equipped with an auto-lock
system that does not require the buttons to be released when lifting the footrest.
7. Do not allow the child to stand or sit on the footrest. The impact of a larger load on
the footrest may cause damage to the locking mechanisms. When the child inde-
pendently gets in and out of the stroller, position the footrest to its lower position.
8. Backrest adjustment in the stroller version. The stroller seat is equipped with an
adjustable backrest. To lower the backrest to half-sitting or to the lying position,
pull the handle in the back part of the backrest upwards, select the required
position and release the handle. The backrest is equipped with a springloaded
auto-lock mechanism that does not require the handle to be lifted when lifting the
Publicidad
