User manual
Appendix #2 - Camera Specifi cations
Camera(s)
Transmit Frequency Range
Data Rate
Transmitting Power
Modulation Type
Transmitting Distance
Image Sensor Type
Eff ective Pixels
Image Processing
Image Resolution / Frame Rate
AES
White Balance
AGC / Range
Lens
Viewing Angle (Diagonal)
Minimum Illumination
IR LED / Night Vision Range
Power Requirement
Power Consumption
Operating Temperature
Operating Humidity
Environmental Rating
Dimensions
(W x D x H)
Appendix #3 – About Digital Wireless Technology
The Digital Wireless signal transmission type used in this digital unit is also known as FHSS –Frequency
Hopping Spread Spectrum. This type of signal is highly resistant to deliberate jamming as it generates a
channel hopping sequence using an algorithm generated by the receiver system.
The 2.4 GHz (2.400-2.483 Ghz) band is being divided into sections or paths of 2 MHz per section, and each
second the transmission signal hops hundreds of times in a specifi ed sequence within this frequency
range. The overall bandwidth required for frequency hopping is much wider then 2 MHz however because
transmission occurs only on a small section of this bandwidth at any given time, the signal being transmitted
does not suff er from greatly reduced signal degradation and also avoids blocked paths other devices who
act as sources of competing signals. The strength of the signal being transmitted is set to be from 13.5-16
dBm, which is much higher then the analog transmission signal allowed by authorities around the Globe.
EN
2.400 GHz~2.485 GHz
3 Mbps
17 dBm (TYP)
GFSK with FHSS
150m (Line of Sight)
1/6 " Color CMOS Image Sensor
H: 640 V: 480
Motion JPEG
H: 640 V: 480 / 20 FPS Máx.
On 1/2000 ~ 1/20 seg
Yes
On / 0 dB~24 dB
3 mm / F2.8
60°
2.5 LUX (IR Off ), 15 LUX (IR On)
8 LEDs / 850 nm 5 m (with IR LED)
5V DC ±5%
240 mA Máx. (with Night Light), 170 mA (without Night Light)
14°F ~ 104°F
-10°C ~ 40°C
0% ~ 85%
14°F ~ 140°F
-10° ~ 60° C
2.6" x 5.7" x 3.3"
66 mm x 145 mm x 84 mm
26
Cyber Max RB212