Channel Search - Salora DVB 420-T Instrucciones De Manejo

28
If you want to change the on screen language
During the first time installation, Finnish is used as the default on screen
display language. If you prefer you can change the language. If not,
continue from step 7.
a) Press the EXIT button.
b) Press the MENU button, select "järjestelmän asetukset" with the arrow
buttons up/down and press the OK button.
c) Select row "valikkokieli" (6'th row) and change the language with the
arrow buttons left/right.
d) Switch off the receiver with the stand by button and switch it back on by
pressing the stand by button once again.
e) Please wait until the "Automatic Channel Search" menu is shown on the
screen.

7 Channel search

Start the automatic channel search by pressing
the OK button on the remote control handset.
Please wait until the yellow tuning bar reaches
100% and the confirmation menu is shown on the
screen! Confirm storing by pressing the OK
button.
8 The receiver is now ready for use
Move to viewing of TV programmes by pressing
repeatedly the EXIT button.
Installation
83040161Gb