Manual Channel Search; Parental Control; Time Setting - Salora DVB 420-T Instrucciones De Manejo

Automatic Channel Search
With this function you can retune the channels if you e.g. have removed
all tuning information with the "Factory Default" function. The menu
includes following settings:
Region in which region the receiver is used
(the setting can not be changed)
Ch No. starting channel of the search
Ch Freq. starting frequency of the search
Search option channel type to search
Start the channel search by pressing the OK button.
Wait until the search bar reaches 100% and confirm the storing of the
channels by pressing the OK button.
Note! Current button functions are shown on the lower part of the
screen.

Manual Channel Search

With this function you can search programmes on desired frequency/
channel. You can also add new frequency and change frequency settings,
but generally there is no need to change these settings.
Select with the arrow buttons up/down the frequency on which you want
to search and start the search with the OK button.
Note! Current button functions are shown on the lower part of the
screen.

Parental Control

On this menu you can lock the receiver or menus or change the menu
viewing time, etc. Follow the instructions viewed on the screen.
When the lock is on, you must enter the PIN code before you can use the
receiver and/or get access to the menu. The factory default PIN code is
0000. If you prefer you can change the PIN code.
Note! Current button functions are shown on the lower part of the
screen.

Time Setting

On this menu you can select if the time is set automatically or manually,
set the time zone correction and set the switch on/switch off timer.
Follow the instructions viewed on the screen.
Note! Current button functions are shown on the lower part of the
screen.
83040161Gb
Main menu
33