Warning And Error Messages - Hobbytech MULTI 80 Manual De Instrucciones

WArning AnD ErrOr MESSAgES

It incorporates various functions of protective and monitoring system to verify functions and the state of its
electronics. In any case of occurring error, the screen displays the cause of error that is self-explanatory
with audible sound.
REVERSE POLARITY
CONNECTION BREAK
SHORT ERR
VOL SELECT ERR
VOL SELECT ERR
BREAK DOWN
BATTERY CHECK
LOW VOLTAGE
BATTERY CHECK
HIGH VOLTAGE
BATTERY VOLTAGE
CELL LOW VOL
BATTERY VOLTAGE
CELL CONNECT
All manuals and user guides at all-guides.com
The output is connected to a battery with incorrect polarity.
This will be displayed in case of detecting an interruption of the connection
between battery and output or voluntarily disconnecting the charge lead
during the operation of charge or discharge on output.
There was a short-circuit at OUTPUT. Please check the charging leads.
The voltage of input power lowers the limit.
The voltage of Lithium battery pack was selected incorrectly. Verify the
voltage of battery pack carefully.
There happens malfunction at the charger circuit by any reason.
The processor detects the voltage is lower than you set at Lithium program.
Please check the cell count of the cell one by one.
The processor detects the voltage is higher than you set at Lithium program.
Please check the cell count of the cell one by one.
The voltage of one of the cell in the Lithium battery pack is too low. Please
check the voltage of the cell one by one.
The voltage of one of the cell in the Lithium battery pack is too high. Please
check the voltage of the cell one by one.
13