Before Using For The First Time - TEFAL Click & Taste BL142A38 Manual Del Usuario

CAUTION: the safety precautions are part of the
appliance. Read them carefully before using your
new appliance for the first time. Keep them in a
place where you can find and refer to them later on.
DESCRIPTION
A Motor unit
B Button 2: fast speed
C Button 1: slow speed
D Bowl blender assembly
D1 Blade unit with seal
D2 Blade unit unlocking button
D3 Positioning ridge
D4 Blender bowl
D5 Lid seal
D6 Lid
D7 Cap
The accessories contained in the model that you have just purchased are represented on the packaging.
SAFETY LOCKING SYSTEM
The appliance will not operate if the blender bowl assembly (D) or the accessories (E) or (F)
are not correctly assembled and correctly positioned on the motor unit (A).
The bowls (E4) (F4) are marked with a coloured line on their base and should be assembled with
the blade units whose release buttons (E2)(F2) are the same colour.
The blender bowl (D4) is not marked with a colour, it should be assembled with the blade unit
that has a yellow release button (D2).

BEFORE USING FOR THE FIRST TIME

Before using for the first time wash all accessories (D, E, F, G) in warm water and a little washing-
up liquid but not the motor unit (A).
WARNING: The cutter blades are extremely sharp, handle them with caution during use,
cleaning or on emptying the bowls.
Make sure that all packaging has been removed before operating the appliance.
Important: Make sure that the motor unit has come to a complete stop, with buttons (B) and (C)
released before fitting the blender assembly or accessories to the motor unit.
Never operate the appliance if the lid fitted (D6) with the seal (D5) has not been placed on the
assembled bowl (D).
INTRODUCTION
This blender will allow you to discover a new world of textures: liquids, chopped fruits and finely
ground powders for culinary success. Using it, you can blend some simple ingredients to obtain
sophisticated recipes.
E Mini chopper (*accessory depending on model)
E1 Blade unit with seal
E2 Blade unit unlocking button
E3 Positioning ridge
E4 Bowl
F Spice mill (*accessory depending on model)
F1 Blade unit with seal
F2 Blade unit unlocking button
F3 Positioning ridge
F4 Bowl
G Lid for accessory
EN
71