Logan L-SA01 Manual Del Usuario página 15

1. Cli c k i n to sensor management i n terface, choose the zone.
2. The management i n terface of door/wi n dow sensors.
4.3.11 Check Alarm Records
1. Cli c k related host to get i n to users management i n terface.
2. Cli c k related i c ons to check alarm messages.
Cli c k "Delete Alarm" to delete all the red bubbles.
4.3.12 APP Alarm Handli n g and Some Noti c es
1. Intrusi o n detectors (Door Sensor/ PIR moti o n sensor/ More detectors) only can be tri g gered to alarm when
host i s i n ARM status. Other types detectors (SOS button / medi c al call button / fi r e detector) can di r ectly
trigger to alarm even i n di s arm status.
2. In Home Stay ARM status, the swi t ch of i n trusi o n detectors needs to turn on so that can be triggered to
alarm.(Default for newly added detectors are home stay arm detectors, user can modi f y the zone types,
detai l s please refer Step 4.3.8 ).
3. If sensors had been tri g gered to alarm, there wi l l be a red spot on sensor management i n terface. Other
types such as (operati n g record/power fai l ure/ temper swi t ch) alarm message wi l l appear i n "Alarm Records",
wi t h a red spot there. After checked, the red spot wi l l di s appear. Or cli c k "clean" to delete all red spot.
4. Di f ferent type of alarm message, APP wi l l push di f ferent alarm musi c to i n form users.
5. If turn on "when GSM network breakdown, APP push message alert" functi o n, when the host detect there i s
somethi n g wrong wi t h the GSM network, APP wi l l push message to alert all the users.
6. If turn on "When Wi-Fi network breakdown, auto change to GSM network" functi o n, when Wi-Fi network
breakdown, Host wi l l send SMS to the 3 preset SMS numbers for remi n der.
7. When those sensors such as door/wi n dow sensor, PIR detector are di s connected wi t h alarm host, APP wi l l
push alert message (wi t hout SMS alert message), and i n sensors management i n terface the related i c on wi l l be
All manuals and user guides at all-guides.com