Logan L-SA01 Manual Del Usuario página 18

All manuals and user guides at all-guides.com
all the setti n g messages wi l l be sent to fi r st SMS number.)
6.4. Arm/Di s arm
Arm: Password + A1 Di s arm: Password + A2
For example: Initi a l password i s 1234, arm remotely by sendi n g SMS: 1234A1
Alarm host repli e s wi t h "Panel armed", the message wi l l be sent to the 3 alarm SMS numbers.
7. Cautions
1. Keep away from water.
2. Install host i n hi d den place wi t h good Wi F i and GSM si g nal.
3. Turn Off power when i n sert/take out the SIM card.
4. Connect power adapter well and keep good heat di s si p ati o n.
5. Enter i n to normal runni n g status about 12 seconds later.
6. Check all the detectors batteri e s i n ti m e and charges them when battery i s low.
7. Don't i n stall alarm host close to the objects wi t h strong interference, such as TV, computer etc.
8. Regularly check the SIM cad i n the alarm host (Check GSM si g nal, balance, etc.)
9 Inspect the alarm systems operati o n regularly.
10. The smart mobi l e phone for i n stalli n g APP should keep the network unblocked, i n case i n formati o n can't
arri v e i n ti m e.
11. Desi g n for i n door use rather than outdoor.
8. How to reset the Gateway to factory default.
Please swi t ch off the power of gateway, hold pressi n g the REC button (the REC button i s on the back of
gateway),swi t ch on power at the same ti m e, i t wi l l be reset successfully after the gateway make 3"di , di , di "
beep sounds. You could setup the gateway agai n for 25s later.