Mitsubishi Electric MDT42IS Manual Del Usuario página 43

No Sound
• Check to see if speaker cable is properly connected.
• Check to see if mute is activated.
• Check to see if volume is set at minimum.
Remote Control is not available
• Check the Remote Control's batteries status.
• Check if batteries are inserted correctly.
• Check if the Remote Control is pointing at the monitor's remote sensor.
"SCHEDULE"/"OFF TIMER" function is not working properly
• The "SCHEDULE" function will be disabled when the "OFF TIMER" is set.
• If the "OFF TIMER" function is enable and the power to the LCD monitor is turned off if the power supply is interrupted
unexpectedly, then the "OFF TIMER" will be reset.
Stripe Noise
Either light vertical or horizontal stripes may appear, depending on the specifi c display pattern. This is no product fault or
degradation.
"NO SIGNAL" is displayed on the screen
Image may not be displayed right after HDCP device is connected.
All manuals and user guides at all-guides.com
English-39