Ex-Cell ES4 Manual De Instrucciones página 3

All manuals and user guides at all-guides.com
HAZARD
RISK OF
EXPLOSION -
INCOMPATIBLE
MATERIALS
RISK TO
BREATHING
RISK FROM
FLYING OBJECTS
Air Inlet
Maximum Air Pressure
Recommended Operating Air Pressure Range
Air consumption @ 20 psi
Jar Capacity
WHAT CAN HAPPEN
The solvents 1,1,1-Trichloroethane
and Methylene Chloride
chemically react with the alumi-
num used in most spray equip-
ment, and this air brush, to
produce an explosion hazard and
could result in serious injury or
death.
Some paints, coatings
solvents may cause lung damage,
and burns if inhaled or allowed to
come into contact with skin or
eyes.
Certain parts are under pressure
whenever the air brush is connect-
ed to a pressurized air line. These
parts may be propelled if the air
brush is disassembled.
Compressed air may propel dirt,
metal shavings, etc. and possibly
cause an injury.
Prolonged exposure to air spray
can result in permanent damage
to hearing.
SPECIFICATIONS
3- ENG
HOW TO PREVENT IT
Read the label or data sheet for
can the material you intend to spray.
1. Never use any type of
spray coating
containing these solvents.
2. Never use these solvents
for equipment cleaning or
flushing.
3. If in doubt as to whether a
material is compatible,
contact
supplier.
and Use a NIOSH approved mask
or respirator and protective
clothing designed for use with
your specific application and
spray materials. Some masks
provide only limited protection
against toxic materials and
harmful paint solvent. Consult
with a Safety Expert or Industri-
al Hygienist if uncertain about
your equipment or materials.
Disconnect the air brush from
the air line, or completely de-
pressurize the air line whenever
the air brush
disassembled.
Never point any nozzle or
sprayer toward a person or part
of the body.
Always wear ANSI 278.1 safety
approved goggles or glasses
when spraying.
Always wear hearing protection
when operating spray equip-
ment.
1/4" NPS
50 psi
15-50 psi
1 scfm
1.25 oz. (37cc)
material
your material
is to be
D28273