Machine Features; Intended Use; General Safety Instructions; Machine-Related Safety Instructions - Protool PDC 12-4 TEC Li Manual Original

Wear protective gloves.
Wear protective goggles.
Do not throw in the household
waste.
3

Machine features

[1-1] LED light switch
[1-2] LED lamp
[1-3] Bit store
[1-4] On/Off switch
[1-5] Clamping sleeve
[1-6] Drilling/impact drilling selector
switch
[1-7] Gear switch
[1-8] Torque thumbwheel
[1-9] Right/left switch
[1-10]Belt clip
[1-11]Button for releasing the battery
pack
[3-1] LED-Display
[3-2] Cable holder
[4] Wall mount
Accessories shown or described are some-
times not included in the scope of delivery.
The specified illustrations appear at the
beginning of the Operating Instructions.
4

Intended use

Cordless impact drills are suitable for
– drilling in metal, wood, plastic and simi-
lar materials,
– impact drilling into walls, concrete and
similar building materials,
– inserting and tightening screws
Charger BCL 3 is suitable for
– charging battery packs: Protool BP, Fes-
tool BPS and BPC (NiMH, NiCd, li-ion are
recognised automatically.)
– internal use only.
The user is liable for improper or non-
intended use; this also includes con-
tinuous industrial operation.
12
All manuals and user guides at all-guides.com
5
5.1
follow the warnings and instructions may
result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings re-
fers to your mains-operated (corded) pow-
er tool or battery-operated (cordless) pow-
er tool.
5.2
– Wear ear protection when impact
– Use auxiliary handle, if supplied
– Hold power tool by insulated grip-
– The charger and power tool are not
– Wear suitable protection: such as ear
Safety instructions

General safety instructions

WARNING! Read all safety warn-
ings and all instructions. Failure to
Machine-related safety in-
structions
drilling. Exposure to noise can result in
loss of hearing.
with the tool. Loss of control can cause
personal injuries.
ping surfaces, when performing an
operation where the cutting acces-
sory may contact hidden wiring or
its own cord. Cutting accessory con-
tacting a "live" wire may make exposed
metal parts of the power tool "live" and
could give the operator an electric shock.
intended for use by persons (includ-
ing children) with limited physical,
sensory or mental ability or without
sufficient experience and/or knowl-
edge, unless they are supervised by
a person responsible for their safety
or have been instructed on how the
charger or power tool is to be
used.Children should always be super-
vised to ensure that they do not play
with the charger or the power tools.
protection, safety goggles, a dust mask
for work which generates dust, and pro-
tective gloves when working with raw
materials and when changing tools.
CAUTION! Rebound!
Rotation: Switch off device immedi-
ately!