Connections; Connecting To A Tv - Seiki SR212S Manual Del Usuario

CONNECTIONS

Do not connect the AC power cord until all the connections are complete.
Be sure to make connections firmly to avoid hum and noise.
Refer to the Owner's Manual for your TV, Amplifier and other devices to be connected to the
Blu-Ray player for detailed connection procedures.

Connecting to a TV

Case 1: Connecting to a TV with an HDMI cable-Best Quality
1. Using an HDMI cable, connect the HDMI OUT socket of the player to the HDMI IN socket
of the TV.
2. Turn on the player and the TV.
3. Select correct input source (e.g. HDMI) on the TV.
Note: An HDMI cable outputs digital video/audio, so you don't need to connect an audio cable.
Case 2: Connecting to a TV with RCA video/audio cables -Good Quality
1. Using video/audio cables, connect the VIDEO OUT (yellow)/AUDIO OUT (red and white)
sockets of the player to the VIDEO IN (yellow)/AUDIO IN (red and white) sockets of the
TV.
2. Turn on the player and the TV.
3. Select correct input source (e.g. AV) on the TV.
SEIKI Blu-ray Manual V01.indd 11
All manuals and user guides at all-guides.com
CONNECTIONS
11
2012-8-14 15:02:05