Troubleshooting - Seiki SR212S Manual Del Usuario

TROUBLESHOOTING

TROUBLESHOOTING
If the player cannot be turned on or does not work normally, please refer to the
following troubleshooting questions. Remember also to check any other connected
device, such as TV or Amplifier to pinpoint the problem. If the player still fails to work
normally, please contact technical support.
Problem
No power
The player does not respond to
the remote control
Disc cannot be played
Disc Menu does not appear
No picture
No sound
Distorted picture
No HDMI output
Abnormal HDMI output screen
"Prohibited icon" appears on the
screen
24
SEIKI Blu-ray Manual V01.indd 24
All manuals and user guides at all-guides.com
Solution
• Check that the player is connected to the AC power
cord securely.
• Point the remote control directly at the sensor on the
player.
• Remove any obstacles between the remote control
and the player.
• Install new batteries.
• There is no disc in the player.
• Check if the disc is loaded properly with label side up.
• Check if the disc is compatible with the player. (Page 6)
• Cancel the parental lock or change the control level.
• Moisture has condensed in the player. Remove the
disc and leave the player turned on for half an hour.
• Clean the disc.
• Ensure that the disc has the menus.
• Check that the player is connected correctly and
securely.
• The video cord may be damaged. Replace it with a
new one.
• Make sure that the TV is turned on.
• Correct the video input on the TV.
• Check that the player is connected correctly and
securely.
• The audio cord is damaged. Replace it with a new
one.
• Make sure that the TV and the amplifier are turned
on.
• Correct the input settings on the amplifier.
• Clean the disc.
• Copy protection may be active. Try connecting the
player directly to the TV.
• Check the HDMI connection between the player and
the TV.
• Check if the TV supports HDMI input resolution.
• Ensure that the disc contains high-definition video.
• If random noise appears on the screen, it means that
the connected TV does not support HDCP (High-
bandwidth Digital Content Protection).
• This icon appears when an invalid button is pressed.
• That operation is prohibited by the player or disc.
2012-8-14 15:02:16