Paging A Group; Disabling Or Enabling Page - ATLINKS 29451 Manual Del Usuario

P G
AGING A ROUP
1. Lift the handset.
2. Press LOWER.
3. Press PAGE.
4. Press the one digit (1-9) number for the group you want to page. Press 0
to page all stations.
5. Listen for the beep. The other stations in the specified group will
automatically activate their speakphones and receive your page.
6. Talk into the handset. You will have 30 seconds paging in this mode.
After 30 seconds, the page will be cancelled.
7. When finished, hang up.
NOTE: To program your own page group number, see "Programming Your
Page Group."
Also, phones which have the page function disabled or those that are in Do
Not Disturb mode cannot be paged. Paging can only be done from the
handset or headset.
D E
ISABLING OR
The station page can be disabled or enabled on each individual station.
The default is set to enable.
1. With the handset hung up, press STORE IN.
2. Press PAGE.
3. Press 0 for disable, 1 for enable.
4. Press # to confirm.
28
All manuals and user guides at all-guides.com
P
NABLING AGE