Alarm Indicators - Olympia NC 455 Manual De Instrucciones

Alarm Indicators

Alarms are indicated in the top display line [24] by
means of code numbers. At the same time, the dis­
play is switched to a red background.
Code No. Cause
EE1
Critical bank notes were detected by the
UV sensor.
Too little or no ultraviolet reaction from
the bank note.
EE2
Critical bank note has been detected.
Too little or no magnetic reaction from
the bank note.
EE4
Bank note was detected as a half bank
note.
EE5
Doubled bank notes have been de­
tected.
EE6
Critical bank note detected by the MT
sensor.
Banknote with abnormal magnetism has
been detected.
EE7
Bank note drawn in at an angle.
EE8
Bank note smaller than default value
has been detected.
EE9
Bank note larger than default value
has been detected.
EEA
Doubled or chained bank notes de­
tected.
EEb
Width difference between the last bank
note and the first bank note counted is
more than the default value.
Solution
Remove the critical bank note from the output
tray [6].
Press the RESET button [18] to continue counting.
Remove the critical bank note from the output
tray [6] and check the bank notes for signs of dam­
age.
Press the RESET button [18] to continue counting.
Adjust the pressure exerted by the infeed rollers.
Check whether the bank notes have stuck together.
Start the counting function again.
Remove the critical bank note from the output
tray [6].
Press the RESET button [18] to continue counting.
Lay the bank note in the infeed tray [3] again.
Press the RESET button [18] to continue counting.
Remove the critical bank note from the output
tray [6].
Press the RESET button [18] to continue counting.
Giu
19