Unpacking; Contents Of Carton; Assembly - GMC BSC900CF Manual De Instrucciones

• Use safety equipment including safety goggles
or shield, ear protection, dust mask and protective
clothing including safety gloves.
Wear goggles
Wear earmuffs
Wear a breathing mask
Any use other than those mentioned in this Manual will
The tool must be used only for its prescribed purpose.
GB
manufacturer shall be liable for any damage or injury
be considered a case of misuse. The user and not the
resulting from such cases of misuse.
The manufacturer shall not be liable for any changes made
to the tool nor for any damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to
eliminate all residual risk factors. The following hazards may
arise in connection with the tool's construction and design:
• Damage to the lungs if an effective dust mask is not worn.
• Damage to hearing if effective earmuffs are not worn.
All manuals and user guides at all-guides.com

Unpacking

Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
Failure to do so could result in serious personal injury.
parts have been replaced or the fault has been rectified.

Contents of carton

• 80 Grit sanding belt (fitted on product)
• Spare drive belt
• Dust canister set
• Vacuum adaptor

Assembly

The Sander is packed, fully assembled, apart from
the dust canister.
6