Norcold 640719 Instrucciones De Montaje

Kit Contents: K1
New Ref. Description
K1 A / A1 Control Housing and PCB Assembly / Screws
NI Not included - Reference Only
Tools Needed:
■ #2 Phillips Screwdriver
■ 6 Inch Needle Nosed Pliers
■ Refrigerator Service Manual
This procedure is to be performed by
WARNING
!
authorized service personnel only.
ATTENTION
Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage.
Failure to disconnect electrical source
WARNING AVERTISSEMENT ADVERTENCIA
DANGER
! ! ! !
can cause dangerous personal injury or
ATTENTION ATTENTION ATTENTION ATTENTION
death.
P.O. Box 1285
Ann Arbor, MI 48106
www.norcold.com
N1152 - Control Housing and PCB Assembly
A1
Fig. 1
Remove Part
1. Remove
2. Disconnect brown wire from terminal of
3. Disconnect white wire from terminal of
4. Disconnect white connectors (2x) from
Replace Part
Using new part,
Questions 1-800-543-1219
Service Kit
A
K1 A1
A1
(2x). Set aside.
K1
, reverse Steps 1-4 above.
Part No. 640632A (06.29.2020)
640719
A
marked "12V IN".
A
marked "GND".
A
.