Trigger / Hold Button; Taking Pictures And Saving Images - Beta 1760TMC 600 Instrucciones

7-4. Trigger / HOLD button

Pressing the trigger (also called the HOLD key), the display still shows
the movement, keeping the infrared thermal image or the image on the
right visible at that time. Press the trigger again, the display will show the
area or object the infrared is currently scanning. This cycle repeats itself.

7-5. Taking pictures and saving images

This tool can contain at least 100 photos in internal memory.
1. The instrument is aimed at the target area or object to be measured
2. Press the trigger (HOLD button), the screen image is fixed.
3. Press the OK / confirm menu button, to save the current photo, a
progress bar below the image shows the progress of the saved image
4. Press the back / on button to cancel saving the photo, to continue
scanning the object.
59