Alarm Setting; Radio Mode - LEXIBOOK Meteoclock RL2000 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
1. In clock mode, press the SET key once to go the alarm setting.
2. Press and hold the SET key until the hour's digits start flashing.
. Use the
and
minutes.
4. Use the
and
the next setting.
5. Use the
and
preset radio stations from "FM01" to "FM20") or "BEEP" (to wake up with the regular
alarm ringtone).
6. Press the SET key to confirm the new settings and go back to the alarm time display.
7. Use the
and
to confirm and go back to clock mode. When the alarm is switched on, the
displayed on the LCD screen in clock mode.
8. When the alarm rings, press the SET, RADIO,
ring again the next day at the same time.
9. When the alarm rings, press the "SNOOZE/LIGHT" key to switch on the snooze
function. The
7 minutes later. To switch off the snooze function and stop the alarm, press and hold
the SET, RADIO,
at the same time.
Note:
• If you don't press any key when the alarm goes off, it will ring for 5 minutes.
• In alarm time setting mode, if you do not press any key for 10 seconds, the unit will
automatically go back to clock mode.
Radio stations preset manual setting
1. In clock mode, press the RADIO key to switch on the radio.
2. Press the
or
(from "FM01" to "FM20").
3. Press and hold the SET key until the frequency's digits start flashing.

ALARM SETTING

keys to adjust the hour, then press SET to confirm and adjust the
keys to adjust the minutes, then press SET to confirm and go to
keys to select the alarm type: "FM" (to wake up with one of the 20
keys to switch on or switch off the alarm then, press the SET key
icon is displayed on the LCD screen and the alarm will ring again
or
keys for 2 seconds. The alarm will ring again the next day

RADIO MODE

keys to select a preset number between the 20 numbers available
or
keys to stop it. The alarm will
icon is
19

Publicidad

Tabla de contenido
loading

Tabla de contenido