Inateck SA01003 Manual De Instrucciones página 5

be normally removed. Forced removal may lead to damage
or loss of crucial data.
b. Why cannot the hard drive with capacity over 2TB be
identified?
When use a new hard drive, you must partition it. MBR(Master
Boot Record) and GPT(GUID Partition Table) are two different
ways saving partition information. The maximum hard drive
capacity supported by MBR is 2TB. It cannot process the
disk with capacity larger than 2TB. GPT does not have such
limit. Therefore, you will need replace MBR with GPT on the
computer.
c. If your drives has been partitioned, please connect directly
with Enclosure to use. It will be showed "New Disk" in
computer. If not, in the premise of system can correctly
identify drives, you can use the partition and formatting
program come with system to reformat it.
D. The enclosure enters sleep mode automatically after lying
idle for 10 minutes.
Support
For any inquiries or comments concerning our products, please
send an email to support@inateck.com, and we will respond to
you as soon as possible.