Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell KSS 80 Ec/370 Manual De Instrucciones Original

2.3 Technical data

Universal motor, radio and TV interference suppressed
Power input (nominal load)
Current at nominal load
Saw blade speed while idling
Saw blade speed at normal load
Cutting depth 0°/30°/45°/60°
Tilting saw unit
Saw blade diameter max/min
Largest thickness basic saw blade body
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight without mains cable, without parallel guide fence
Dimensions (W x L x H)
as cross-cutting system
Cutting depth 0°/30°/45°/60°
Cutting length at 80 mm workpiece thickness
Weight with guiding device, without mains cable
Dimensions incl. guide assembly (W x L x H)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Cross-Cutting System KSS80Ec/370 complete with:
1 carbide-tipped circular saw blade Ø 237 mm (6 1/4 in.), 12 teeth
1 riving knife / splitter (thickness 2.0 mm/3.32 in.)
1 parallel stop
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety Instructions"
All manuals and user guides at all-guides.com
Sound power level
102 dB (A)
2 .
-17-
230 V~, 50 Hz or 110 V~, 50 Hz
2300 W (230 V) or 1800 W (110 V)
10,8 A (230 V) or 17 A (110 V)
2250 - 4400 rpm
2000 - 3300 rpm
88/75/61/44 mm (3 15/32 in., 2 61/64 in., 2
13/32 in., 1 47/64 in.)
0° – 60°
237/220 mm (9 21/64 in./8 21/32 in.)
2.0 mm (5/64 in.)
2.5 mm (3/32 in.)
30 mm (1 23/128 in.)
35 mm (1 3/8 in.)
7.3 kg (16.1 lbs)
270 x 414 x 305 mm (10 5/8 x 16 19/64 x 12 in.)
82/69/55/38 mm (3 7/32 in., 2 23/32 in., 2 5/32
in., 1 3/16 in.)
370 mm (14 9/16 in.)
8.8 kg (19.4 lbs)
295 x 810 x 305 mm (11 5/8 x 31 7/8 x 12 in.)
Workplace-related emission value
91 dB (A)