The EXPRESSlink
of EN 60601-1:2006. This standard addresses electrical safety
of medical electrical equipment and covers also its electromag-
netic compatibility for a typical health care environment. Please
note that some devices (cell phones, cordless phones, WLAN
systems, other intentional radiators) might generate electro-
magnetic emissions that exceed the tested limits and might
influence the operation of the EXPRESSlink
such interference enlarge the distance between the EXPRESS-
link
and the interfering device.
3
6
OPERATION
Connecting and fitting hearing instruments
For information on how to configure EXPRESSlink
and how to connect and fit hearing instruments, please refer to the instal-
lation manuals or to the help files with your fitting software.
Some products may require a fresh battery in order to be con-
nected and fit with the programming device, while other prod-
ucts require the battery to be removed in order to be connected
and fit with the programming device. To find out which prod-
ucts need a battery inserted and which products may not have
batteries inserted, please refer to the product information, the
installation guides, or help files included with the fitting soft-
ware or contact your local sales representative or support.
Typically, EXPRESSlink
programming interface. The next time you can just launch the fitting
software and start fitting hearing instruments.
All manuals and user guides at all-guides.com
was tested to comply with the requirements
3
only needs to be configured once as default
3
. In the event of
3
in the fitting software
3
7