Toolshop 241-9934 Manual De Seguridad Y Operacion página 10

OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
ASSEMBLY
1. AUXILIARY HANDLE(See Fig A1
For all work with the machine, the auxiliary handle (6) must be mounted.
Screw the auxiliary handle (6) into the head of the machine according to the working
method. There are three positions for you to choose. (See Fig A1)
Hold both the main handle (5) and the auxiliary handle firmly to operate the machine.
(See Fig A2)
Warning! Do not make any alterations to the auxiliary handle.
Do not continue to use an auxiliary handle if it is damaged.
A1
2. 'D' SHAPE REAR HANDLE (See Fig B1,B2)
Screw the 'D' shape auxiliary handle (3) into the rear of the machine according to the
working method. Turn the locking knob (4) clockwise to tighten the handle. (See Fig B1)
(See Fig B1)
When not in use, screw the locking knob (4) anti-clockwise to loosen the handle and
put it away.
Hold both the main handle and rear handle firmly to operate the machine. The direction
of the 'D' shape handle can be changed to any position you need. (See Fig B2)
B1
A 2)
， ， ， ，
A2
B2
10