Proper Use; Technical Data; Before Starting The Equipment - Kraftixx KX-ASH 1835 Li Manual De Instrucciones Original

3. Proper use

This cordless telescoping pole hedge trimmer is
designed for cutting hedges, bushes and shrubs.
Caution! Do not use this equipment to cut grass.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Motor power supply: ............................... 18 V DC
Cutter bar length: ................................... 450 mm
Cutting length: ........................................ 400 mm
Tooth spacing: .......................................... 16 mm
Cutting thickness: ..................................... 12 mm
Overall length: .......................... 2.15 m to 2.97 m
Cuts/min: .............................................1400 min
Battery (lithium-ion)
Voltage ............................................. 18 V
Capacity ................................................... 2.0 Ah
18 V Kraftixx battery charger
Mains voltage ..........200-250 V~, 50-60 Hz, 72 W
Output voltage/current ........................................
....................................... 20 V
Danger!
Noise and vibration
The noise and vibration values were measured in
accordance with ISO 3744, ISO 5349-1 and ISO
5349- 2.
Sound pressure level L
Uncertainty K ............................................. 3 dB
pA
Measured sound power level L
Uncertainty K ............................................ 3 dB
WA
Guaranteed sound power level L
Anl_KX_ASH_1835_Li_SPK13.indb 17 Anl_KX_ASH_1835_Li_SPK13.indb 17
-1
/ 3000 mA
.................... 83.6 dB(A)
pA
...... 96.2 dB(A)
WA
...... 102 dB(A)
WA
- 17 -
GB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) were determined in accordance with ISO
5349-1 and ISO 5349-2.
Handle (front)
Vibration emission value a
K uncertainty = 1.5 m/s
2
Handle (rear)
Vibration emission value a
Uncertainty K = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.

5. Before starting the equipment

Caution! Do not fi t the battery until the equipment
has been fully assembled and all the settings
have been actuated. Always wear protective
gloves when working on the equipment to protect
yourself against injury. Carefully unpack all parts
and check that they are complete (Fig. 1).
5.1 Assembly in general (Fig. 1-4)
•
Push the telescoping pole (8) onto the hedge
trimmer head (11). Make sure that you push
=2.007 m/s
2
h
=1.754 m/s
2
h
2
20.05.2021 08:43:26 20.05.2021 08:43:26