Hama 00044304 Instrucciones De Uso página 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new
owner.
Controls and Displays
1. DC 6 V input
2. Antenna cable
3. LED
4. Dial/ On/off switch
5. Stand base
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• DVB-T Indoor Antenna
• Power supply unit
• Stand base
• Antenna cable
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Children should be supervised to ensure that they do not
play with the device.
• Do not use the product in areas where the use of elec-
tronic devices is not permitted.
• Connect the product only to a socket that has been ap-
proved for the device. The electrical socket must always
be easily accessible.
• Disconnect the product from the network using the
power button – if this is not available, unplug the power
cord from the socket.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any
major shocks.
2
All manuals and user guides at all-guides.com
• Dispose of packaging material immediately according to
• Do not modify the device in any way. Doing so voids the
4. Specifications
5. Startup and Operation
• Connect the antenna's power supply unit to a socket and
• If you're using an external DVB-T receiver, connect the
• Switch the antenna on using the dial. The LED lights up
• Position the antenna for the best possible reception.
• Switch off the antenna when it is not in use.
• Now plug the base provided into the rear of the
locally applicable regulations.
warranty.
Warning
• Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
• Do not attempt to service or repair the device
yourself. Leave any service work to
qualified experts.
• Do not open the device or continue to operate it if it
becomes damaged.
Supply voltage
220 – 240 V ~ / 50 Hz
power supply unit
Rated power
max. 50 mA
consumption
Supply voltage
6 V
antenna
Frequency range 30 – 950 MHz
Amplification max. 43 dB
Connection coax plug
Ambient temperature -20 to +40° C
connect the antenna cable to the TV (Pic. 2a).
antenna to the mains plug and the DVB-T receiver
(Pic. 2b).
blue.
Depending on the station, the amplifier performance (4)
must be adjusted using the dial.
antenna.
Note
Please note that the number and quality of stations
received may vary depending on the position of the
antenna and local conditions.
50 mA