Grizzly Tools ERT 450-20 Traducción Del Manual De Instrucciones Original página 60

GB
• Store the equipment in a dry
place that is not accessible to
children.
CAUTION! The following
states how damage to the
equipment and possible inju-
ry to people can be avoided:
Taking care of the equipment:
• Ensure that the ventilation
openings are not clogged.
• Only use spare parts and ac-
cessories that have been sup-
plied or recommended by the
manufacturer.
• Never try to repair the equip-
ment yourself. All work that
has not been listed in these In-
structions must only be carried
out by an authorised servicing
agency.
• Treat the equipment with the
greatest care. Always keep the
equipment clean for better and
safer work. Follow the mainte-
nance instructions.
• Never overload the equipment.
Always work within the stated
capacity range. Do not use low-
power machines for heavy-duty
work. Do not operate the equip-
ment for purposes for which it
is not intended.
• Always inspect the equipment
before it is to be used. Do not
operate the equipment if safety
devices, parts of the cutting de-
vice or bolts are missing, worn
out or damaged.
60
Electrical safety:
CAUTION! The following
states how to avoid ac-
cidents and injuries due to
electric shock:
• Before each usage, check the
mains power cable and the
extension cable for damage
and signs of aging. Do not use
the device if the cable is dam-
aged or worn. Damaged mains
power cables increase the risk
of electric shock.
• Always keep the extension ca-
ble well away from the cutting
tools.
Should the power cable be-
come damaged during work,
then instantly disconnect
the power cable from the
mains. DO NOT TOUCH THE
POWER CABLE BEFORE IT
HAS BEEN DISCONNECTED
FROM THE MAINS! Risk of
electric shock.
• If the power cable for this
equipment is damaged, it must
be replaced with a special
power cable, which is avail-
able from the manufacturer or
a customer service agent of the
same.
• Check that the mains voltage
is the same as indicated on the
rating plate.
• Wherever possible connect the
equipment to a power socked
with a residual-current circuit
breaker that has a rated current
of not more than 30 mA.
• Protect the equipment from
moisture. The equipment must