Nolan X-lite X-1002 Seguridad E Instrucciones página 13

ATTENTION!!!
- Make sure that the system has been assembled properly by pulling up and
down the visor.
- Scratched visors and inner visors can cause reduced visibility and must there-
fore be changed.
2 DISASSEMBLY
2.1 Remove the visor equipped with inner visor.
2.2 Widen the visor: the inner visor will come off automatically.
• WIND PROTECTOR / BREATH DEFLECTOR
These accessories allow to improve the helmet performances in particular use conditions.
The wind protector prevents annoying air infiltration from the chin area (see Fig. 17 for
assembly and disassembly).
The breath deflector prevents the visor misting by diverting the breath flow downward
(see Fig. 18 for assembly and disassembly).
ATTENTION!!!
The wind protector and breath deflector are easily removable. The correct assembling of
these accessories can be checked by pulling them slightly with your thumb and forefinger.
If they move, then repeat the assembling operations.
13