Emc Compliance Declaration; Electromagnetic Compatibility Information - Beurer BF 54 Manual De Instrucciones

Beurer does not authorize anyone, including, but not limited to, retailers, the subsequent consumer purchaser of
the product from a retailer or remote purchaser, to obligate Beurer in any way beyond the terms set forth herein.
This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealed pro-
ducts, including but not limited to sale of such products on Internet auction sites and/or products by surplus or
bulk resellers. Any and all warranties or guarantees shall immediately cease and terminate in connection with
any products or parts thereof which are repaired, replaced, altered, or modified, without the prior explicitly writ-
ten consent of Beurer.
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
For more information regarding our product line in the USA, please visit: www.beurer.com
Distributed by:
Beurer North America LP
Hallandale Beach, FL 33009
www.beurer.com
Questions or comments? Call toll free 1-800-536-0366 or contact info@beurer.com
Made in China.

14. EMC Compliance Declaration

ELECTROMAGNETIC COMPATIBILITY INFORMATION

Table 1
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacture's declaration – electromagnetic emissions
The BF 54 is intended for use in the electromagnetic environment specified below.
The customer or the user of the BF 54 should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Table 2
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacturer's declaration – electromagnetic immunity
The BF 54 is intended for use in the electromagnetic environment specified below. The customer or the user of
the BF 54 should assure that it is used in such an environment.
IMMUNITY test IEC 60601 test level Compliance level Electromagnetic environment – guidance
Electrostatic
± 6 kV contact
discharge (ESD)
± 8 kV air
IEC 61000-4-2
Power frequency
(50/60 Hz)
3 A/m
magnetic field
IEC 61000-4-8
All manuals and user guides at all-guides.com
Compliance Electromagnetic environment – guidance
The BF 54 uses RF energy only for its internal function. Therefore,
Group 1 its RF emissions are very low and are not likely to cause any inter-
ference in nearby electronic equipment.
Class B
± 6 kV contact
± 8 kV air
3 A/m
Floors should be wood, concrete or ceramic tile.
If floors are covered with synthetic material, the
relative humidity should be at least 30 %.
Power frequency magnetic fields should be at
levels characteristic of a typical location in a typi-
cal commercial or hospital environment.
14