Axxes Viaxxes SAT Guia Del Usuario página 18

CHAPTER 4
CHANGING THE NUMBER OF AXLES
The number of axles needs to be selected whenever the configuration of tractor
and trailer changes to indicate the total number of axles in use.
Screen showing the
"Change axles" menu
1. Double-click on to enter the main menu.
2. Navigate to the "Change axles" menu and press
3. Navigate to the correct value then press
4. Press to leave the menu and return to the main screen.
i
On the motorway network, the motorway class invoicedis based on the
number of axles detected when you pass through the toll lane.
All manuals and user guides at all-guides.com
Axxès
0 = 0 : 2
0 = 0 - 0 = 0 : 3
0 = 0 - 0 = 0 : 5+
to enter the menu.
to record your choice.
Axxès
Number of axles selected
AAA123AA
CO2 : 0
EURO : 2
34
CHAPTER 4
CHANGING THE NUMBER OF AXLES
The number of axles you have selected is displayed to the right of the main screen.
The available numbers of axles are determined according to your
declaration when the vehicle is registered.
.
If the number of axles has changed, see the "Choosing the number
of axles" chapter.
i
A zero CO2 value indicates that the parameter has not been entered.
Number of axles
Axxès
selected
AAA123AA
CO2 : 0
4
EURO : 2
35