Kathrein UFO 372/TP Manual Del Usuario página 21

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

1.12
Selecting the position of the output spectrum
The position of the output spectrum can be inverted in the QAM stage sub-menu.
The output signal QAM stage is selected using the "<" and ">" buttons.
Pressing the "Sub-menu" button
The output spectrum is selected using the "<" and ">" buttons and adjusted using the "+" and "-" buttons.
I
1236
MHz
27.500
MS/s
Outp.
S21
6.900
MS/s
Main menu
The following settings are available:
Spectrum
1.13
Transport stream processor: Programme fi lter
I
1236
MHz
27,500
MS/s
Outp.
S21
6,900
MS/s
Main menu
"Filter" programme fi lter operating mode is selected in the TP (Transport stream processor) sub-menu.
The "TP" transport stream processor is selected with the " < " or " > " buttons and the sub-menu is called up with the "Sub-menu"
button.
The "Filter" programme fi lter is selected with the " < " or " > " buttons and is activated/deactivated with the " + " and " - " buttons.
The settings available are Filter "on" / "off".
This sub-menu can be exited only when the cursor is on the "OID" parameter.
To do this, use the " < " and " > " buttons to select "OID" and press the "Sub-menu" button to return to the main menu.
When Programme fi lter is set to "on", a "P" appears at the top right of the main menu.
**
UFO 372TP-I
Filter
OID
"Transport stream processor" sub-menu
To process the programming list for the programme fi lter, the current programme table is read from the transponder pressing
the "Sub-menu" button at the "on"/"off" parameter in the programme fi lter. A progress bar appears whilst this is being done.
As soon as the channel unit has successfully determined this information, the sub-menu for adjustment is displayed.
**
UFO 372TP-I
T
/
001
/
009
Das Erste
Generate
"Filter" sub-menu
All manuals and user guides at all-guides.com
activates the sub-menu; pressing the "Sub-menu" button again deactivates it.
TP
3/4
QPSK
306.00
MHz
256
QAM
The output signal is output in the control position
normal
The output signal is output with an inverted spectrum
inverse
P TP
3/4
QPSK
306.00
MHz
64
QAM
**
off
off
09h
**
/
-
**
UFO 372TP-I
Mode
SAT Sig
Spectrum
normal
"QAM stage" sub-menu
**
UFO 372TP-I
Filter
OID
"Transport stream processor" sub-menu
Programme
information
is read in
...
When changing to the "Filter" sub-menu
**
UFO 372TP-I
T
/
001
/
009
Das Erste
Generate
"Filter" sub-menu
**
**
on
off
09h
**
/
-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

20610084

Tabla de contenido